Asus p4r800vm Motherboard DIY Troubleshooting Guide - Page 20
System memory - memory type
View all Asus p4r800vm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1.7 System memory 1.7.1 DIMM sockets location The following figure illustrates the location of the DDR DIMM sockets. DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 80 Pins 104 Pins P4R800-VM P4R800-VM 184-Pin DDR DIMM Sockets Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. When installing long AGP cards, it is recommended to install the memory modules first. Long AGP cards, when installed, may interfere with the memory sockets. 1.7.2 Memory configurations You may install 64MB, 128MB, 256MB, 512MB, and 1GB DDR DIMMs into the DIMM sockets using the memory configurations in this section. Important notes • Installing DDR DIMMs other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations in Table 1. • A three-DIMM configuration is not supported on this motherboard • In dual-channel configurations, always install an identical (the same type and size) DDR DIMM pair on sockets of the same color. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. 1-10 Chapter 1: Product introduction