Audiovox FPE3000 User Manual - Page 22

Operations in TV mode Channel Preset CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF or key to change * To exit the menu, press ENTER button. To enter into CHANNEL SETTING menu 1. Press MENU button repeatedly to display CHANNEL SETTING menu. 2. Press CH5 or CH6 button to select item. 3. Press VOL+ or VOL- button to confirm or adjust selected item. Antenna / Cable selection Enter into CHANNEL SETTING menu and select Source item. Press VOL- or VOL+ button to select Antenna or Cable. Antenna: If using a VHF/UHF antenna (2-68). Cable: If using Cable TV (2-125). CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF or key to change Auto Search Please enter into CHANNEL SETTING menu and select Auto Search item. Press VOL- or VOL+ button to start Auto Search and all active programs will be memorized. During the process of Auto Search, pressing MENU button will stop Auto Search. Antenna Auto searching 28 VHFL Press to escape Adding and skipping channels After auto search, you can add or skip channels as follows: Select a channel to be added or skipped by direct channel select buttons. Enter into CHANNEL SETTING menu and select Skip item. Press VOL- or VOL+ button to select On or Off. Skip On: To skip the current channel. CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF or key to change Skip Off: To add the current channel. Fine tuning In area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning. Use 0~9 digit buttons or CH5/6 buttons to select the desired channel, then enter into CHANNEL SETTING menu and select Auto fine tune item. Press VOL+ button to select ON to activate the auto fine tune. CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF or key to change 22