Audiovox FPE3000 User Manual - Page 33
Adjustment in PC mode
View all Audiovox FPE3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Adjustment in PC mode To enter into PC mode Repeatedly press button on the remote control or SOURCE button PC on the set's panel until the screen display PC, which indicates that the set is in PC mode. PC signal format Please connect VGA input and be sure that there is VGA input signal. The signal format should be one of the follows: 640X480 @60Hz 800X600 @60Hz 1024X768 @60Hz 1280X768@60Hz We recommend you to use 1024X768 @60Hz (4:3) or 1280X768@60Hz (16:9) so that the set can obtain the best picture. Use AUTO. ADJ button When PC signal format changes or when you switch to PC mode by button, the set corrects picture automatically including frequency and phase to obtain the best display. During the process of auto correction, all buttons on the remote control and set's panel do not work until this process is finished. When the set displays some signal formats that are nonstandard and can not adjust by itself to the best displaying status, now you can press AUTO.ADJ button to correct the displaying again. 33