Audiovox MMD70 Installation Manual - Page 29

P. Specification, Q. Troubleshooting - audio video

Page 29 highlights

P. Specification Disc format: DVD/CD/MP3 Color system: NTSC/PAL Screen size: 7" Frequency response: 20 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.4Vrms/10kOhm Audio S/N: Better than 60 dB Dynamic range : Better than 85 dB Laser: Semiconductor Laser, Wave Length: 650 nm/790 nm Power source: DC 12V Power consumption: 30 W Operating temperature: 5~35°C Storage temperature: -20~60°C (4~140°F) Operating humidity: 10~75% Dimensions (W x H x D): 223 x 165 x 50 mm (8.78" x 6.5" x 1.97") Q. Troubleshooting: SYMPTOM: REMEDY: No power at Video Monitor -Verify +12 VDC on Red wire at 2 pin Power Harness behind video monitor. Verify ground connection with continuity test from known good ground to black wire at 2 pin Power Harness. Power but no video or sound -Verify that the correct source is selected (i.e.: DVD, AV1 or AV2). Verify that the source is on and playing a known good media (such as a videotape). Verify connections at both ends of the harness. Picture, but no sound -Verify that the headphones are turned on; check headphone batteries. -Verify that power is available to the FM Modulator; make sure the modulator and the vehicle radio are tuned to the FM station. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

29
P. Specification
Disc format: DVD/CD/MP3
Color system: NTSC/PAL
Screen size: 7
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4V
rms
/10kOhm
Audio S/N: Better than 60 dB
Dynamic range : Better than 85 dB
Laser: Semiconductor Laser,
Wave Length: 650 nm/790 nm
Power source: DC 12V
Power consumption: 30 W
Operating temperature: 5~35
°
C
Storage temperature:
-20~60
°
C (4~140
°
F)
Operating humidity: 10~75%
Dimensions (W x H x D): 223 x 165 x 50 mm (8.78
x 6.5
x 1.97
)
Q. Troubleshooting:
S
Y
M
P
T
O
M
:
No power at Video Monitor
Power but no video or
sound
Picture, but no sound
R
E
M
E
D
Y
:
-Verify +12 VDC on Red wire at 2 pin
Power Harness behind video monitor.
Verify
ground connection with conti-
nuity test from known good ground to
black wire at 2 pin Power Harness.
-Verify that the correct source is se-
lected (i.e.: DVD, AV1 or AV2).
Verify
that the source is on and playing a
known good media (such as a
videotape). Verify connections at both
ends of the harness.
-Verify that the headphones are turned
on; check headphone batteries.
-Verify that power is available to the FM
Modulator; make sure the modulator
and the vehicle radio are tuned to the
FM station.