Behringer RD-9 Manual - Page 25

25 RHYTHM DESIGNER RD-9 User Manual Song Parameters Some of the parameters in the Song Data file are comparable to the Global Parameters. When these parameters are in use (i.e. the corresponding Preference is set to Song), loading a new song will trigger the corresponding change in the sequencer. A tempo change is one such example. Preference Name Description Values Tempo Swing Probability Flam Filter Mode Filter Enable Filter Automation Filter Step Values (1 - 64) Polymeter Step Size The tempo of the song is stored. The Swing level is stored. The probability of a step being heard is stored per song. The flam level is stored per song Filter Mode is stored per song, either LPF or HPF. Whether the filter is on/off per song. Automation of the filter is stored per song. Filter step values per song are stored. Polymeter is either on/off per song. Step size is stored for the song. Auto Advance FX Bus Sends Mute Voices Solo Voices Accent Mode Accent Values (1 - 10) Whether or not the song will auto advance to the next or not is stored per song. Whether or not the FX bus send is active or not, stored per song. Which voices are muted, stored by song. Which voices are soloed, stored by song. Accent Mode is stored per song. Accent Values are stored per song. 20 - 240 BPM 50 - 75 % 0 - 100 % 0 - 24 0 = LPF, 1 = HPF 0 = Off, 1 = On 0 = Inactive, 1 = Active 0 - 255 0 = Off, 1 = On 0 = 1/8th, 1 = 1/8th Tr, 2 = 1/16th, 3 = 1/16th Tr, 4 = 1/32ndth 0 = Off, 1 = On 0 = Inactive, 1 = Active 0 = Inactive, 1 = Active 0 = Inactive, 1 = Active 0 = Global, 1 = Independent Global Accent Values (1 - 10)