Behringer RD-9 Manual - Page 28
Pattern Parameters
View all Behringer RD-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 RHYTHM DESIGNER RD-9 User Manual Pattern Parameters Some of the parameters in the Pattern Data file are comparable to the Global Parameters. When these parameters are in use (i.e. the corresponding Preference is set to Pattern), selecting a new pattern for playback will trigger the corresponding change in the sequencer. A change to the Step Size is one such example. Preference Name Description Values Tempo Swing Probability Flam Filter Mode The tempo of the pattern is stored. The Swing level is stored per pattern. The probability of a step being heard is stored per pattern. The flam level is stored per pattern Filter Mode is stored per pattern, either LPF or HPF. Filter Enable Whether the filter is on/off per pattern. Filter Automation Automation of the filter is stored per pattern. Filter Step Values (1 - 64) Filter step values per pattern are stored. Polymeter Polymeter is either on/off per pattern. Step Size Step size is stored for the pattern. Auto Advance FX Bus Sends Mute Voices Solo Voices Accent Mode Accent Values (1 - 10) Whether or not the song will auto advance to the next or not is stored per pattern. Whether or not the FX bus send is active or not, stored per pattern. Which voices are muted, stored by pattern. Which voices are soloed, stored by pattern. Accent Mode is stored per pattern. Accent Values are stored per pattern. 20 - 240 BPM 25% - 75% 0 - 100 % 0 - 24 0 = LPF, 1 = HPF 0 = Off, 1 = On 0 = Inactive, 1 = Active 0 - 255 0 = Off, 1 = On 0 = 1/8th, 1 = 1/8th Tr, 2 = 1/16th, 3 = 1/16th Tr, 4 = 1/32ndth 0 = Off, 1 = On 0 = Inactive, 1 = Active 0 = Inactive, 1 = Active 0 = Inactive, 1 = Active 0 = Global, 1 = Independent Global Accent Values (1 - 10)