Beko BDG581 User Manual - Page 13

Danger, Adanger - gas cooker

Get Beko BDG581 PDF manuals and user guides View all Beko BDG581 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

main fuse box. If in doubt contact a qualified electrician. Green and yellow or green Regulations The cooker must be installed in accordance with the Gas Safety (Installation and Use) Regulations and the relevant Building Regulations in force. Blue or black Brown or red UK_Plug DANGER Before starting any work on the electrical installation, disconnect the product from the mains supply. There is the risk of electric shock! Plug the power cable into the socket. Gas connection A, DANGER •I Product can be connected to gas supply system only by an authorised and qualified person. Risk of explosion or toxication due to unprofessional repairs! Manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorised persons. our product is equipped for natural gas NG). The cooker is designed for UK installation using a flexible connection with tubing in accordance with the regulations in force. Length of 900mm is recommend. Make sure that the natural gas valve is readily accessible. Service Representative will remove the plug during connection and connect your appliance by means of a straight connection device (coupling). If a flexible hose is used it must not come into contact with the top 150mm/6 inches (hot region) of the rear of the appliance. Do not pass the hose through the (**) hot region behind the oven. ADANGER • Before starting any work on the gas installation, disconnect the gas supply. There is the risk of explosion! • Gas adjustment conditions and values are stated on labels (or ion type label). • In the UK, Gas Safe registered installers (Including the Regions of British Gas) undertake to work to safe and satisfactory standards. (**) Hot region If you need to use your appliance later with a different type of gas, you must consult an authorised service centre for the related conversion procedure. Seal all connections with gas sealant. 1. Turn of the gas supply. 2. Connect safety (gas) hose 5 to the inlet valve of the oven. 3. Connect gas hose with elbow joint 6 . 12/EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
main
fuse
box.
If
in
doubt
contact
a
qualified
electrician.
Green
and
yellow
or
green
Blue
or
black
Brown
or
red
UK_Plug
DANGER
Before
starting
any
work
on
the
electrical
installation,
disconnect
the
product
from
the
mains
supply.
There
is
the
risk
of
electric
shock!
Plug
the
power
cable
into
the
socket.
Gas
connection
A
I
,
DANGER
Product
can
be
connected
to
gas
supply
•
system
only
by
an
authorised
and
qualified
person.
Risk
of
explosion
or
toxication
due
to
unprofessional
repairs!
Manufacturer
shall
not
be
held
responsible
for
damages
arising
from
procedures
carried
out
by
unauthorised
persons.
ADANGER
Before
starting
any
work
on
the
gas
•
installation,
disconnect
the
gas
supply.
There
is
the
risk
of
explosion!
•
Gas
adjustment
conditions
and
values
are
stated
on
labels
(or
ion
type
label).
•
In
the
UK,
Gas
Safe
registered
installers
(Including
the
Regions
of
British
Gas)
undertake
to
work
to
safe
and
satisfactory
standards.
Regulations
The
cooker
must
be
installed
in
accordance
with
the
Gas
Safety
(Instal
lation
and
Use)
Regulations
and
the
relevant
Building
Regulations
in
force.
our
product
is
equipped
for
natural
gas
NG).
The
cooker
is
designed
for
UK
installation
using
a
flexible
connection
with
tubing
in
accordance
with
the
regulations
in
force.
Length
of
900mm
is
recommend.
Make
sure
that
the
natural
gas
valve
is
readily
accessible.
Service
Representative
wil
l
remove
the
plug
during
connection
and
connect
your
appliance
by
means
of
a
straight
connection
device
(coupl
ing).
If
a
flexible
hose
is
used
it
must
not
come
into
contact
with
the
top
150mm/6
inches
(hot
region)
of
the
rear
of
the
appliance.
Do
not
pass
the
hose
through
the
(**)
hot
region
behind
the
oven.
(**)
Hot
region
If
you
need
to
use
your
appliance
later
with
a
different
type
of
gas,
you
must
consult
an
authorised
service
centre
for
the
related
conversion
procedure.
Seal
al
l
connections
with
gas
sealant.
1.
Turn
of
the
gas
supply.
2.
Connect
safety
(gas)
hose
5
to
the
inlet
valve
of
the
oven.
3.
Connect
gas
hose
with
elbow
joint
6
.
12/EN