Beko BDG581 User Manual - Page 14

6 54 1 2 C2> 1 3 1 Gasket 2 Adapter (optional) with 1/2" outlet 3 Gasket 4 Gas (safety) hose 5 Valve with 90° outlet 6 Connection piece 7 Gas supply pipe A DANGER \The gas hose must not be clamped, bent or trapped or come into contact with hot parts of the product. There is the risk of explosion due to damaged gas hose. • Push the product towards the kitchen wall. • Hook safety chain. • Adjusting the feet of oven Vibrations during use may cause cooking vessels to move. This dangerous situation can be avoided if the product is level and balanced. For your own safety please ensure the product is level by adjusting the four feet at the bottom by turning left or right and align level with the work top. Final check 1. Open gas supply. 2. Check gas installations for secure fitting and tightness. 3. Ignite burners and check appearance of the flame. Flame must be blue and have a regular shape. If the flame is yellowish, check if the burner cap is seated securely or clean the burner. Gas conversion ADANGER Before starting any work on the gas installation, disconnect the gas supply. There is the risk of explosion! In order to change your appliance's gas type, change all injectors and make flame adjustment for all valves at reduced flow rate position. • Gas conversion must only be carried out by a Gas Safe registered installer or service agent. Exchange of injector for the burners 1. Take off burner cap and burner body. 2. Unscrew injectors by turning the counterclockwise. 3. Fit new injectors. 4. Check all connections for secure fitting and tightness. New injectors have their position marked on their packing or injector table on Injector table, can be referred to. 2 3 4 1 Flame failure device (model dependant) 2 Spark plug 3 Injector 4 Burner Unless there is an abnormal condition, do not attempt to remove the gas burner taps. ou must call an Authorised service agent if it is necessary to change the taps. 13/EN