Beko CEG5311Bio Owners Manual - Page 16
Adjusting The Volume of Your Coffee/Hot Water, To reset to the default/factory settings, 5
![]() |
View all Beko CEG5311Bio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5 Operation 5.4 Adjusting The Volume of Your Coffee/Hot Water You can save your desired volume of coffee for both strong espresso and mild espresso and also the hot water from 25ml to 250ml. 2x beep! When making your coffee (either strong espresso or mild espresso) press and hold the button you selected. The appliance will continue to make the cup of coffee while holding on the button. When the volume of coffee meets your desired volume, release the button. If you hear two beeps, that indicates the machine has saved the volume of coffee that you prefer. To reset to the default/factory settings; In order to reset to the default settings of coffee and hot water volume selection recorded in memory, it is necessary to reset to the factory settings. 1. When the device is off, remove the inner and outer drip pans, 2. Remove the service cover, 3. Remove the carafe, 4. Place the service cover, 5. Press down the on-off key for 5 seconds (It beeps 2 times) 6. Open the service cover, 7. Place the carafe, 8. Close the service cover, 9. Place the drip tray. It has been resetted to factory settings. 5.5 Preparing Frothy Milk for Coffee As the temperature of steam is higher than the temperature of espresso, the espresso should be prepared before making frothy milk. Otherwise the espresso might get burnt. 16 / EN Fully Automatic Coffee Machine / User Manual
![](/manual_guide/products/beko-ceg5311bio-owners-manual-43c2d58/16.png)