Beko CEG5311Bio Owners Manual - Page 17

5 Operation Prepare the espresso coffee with a larger cup. Turn the steam nozzle toward to the Drip tray. Press the steam button. The steam indicator light will flash. Then the appliance will heat up and drain the residual water into the Drip Tray or another container. After the steam indicator light stops flashing and stays steady, place a container with milk under the steam nozzle and immerse the steam nozzle about 5cm deep into the container. Swivel the container while the hot steam comes out. Pour the hot frothy milk into the espresso. Now you can enjoy your coffee! After the usage of steam nozzle, please clean the nozzle from the milk residue by wiping away the nozzle with a wet rag. It is recommended to remove any milk residue that may accumulate at the tip of the nozzle by activating hot water function from the nozzle. 5.6 Hot Water The appliance can dispense hot water by simply pressing the hot water button. The hot water button and the illumination lit up indicates that the appliance is heating up the water. When the hot water button and the illumination turn off, the water is ready to serve. 5.7 Mode Selection The machine has three different settings: the default setting, ECO mode and speed mode. In ECO mode, the appliance saves more energy. In speed mode, the user can make their coffee faster than in the default setting. Fully Automatic Coffee Machine / User Manual 17 / EN