Beko CEG5311Bio Owners Manual - Page 20

6 Cleaning 2 1 Press unlock area, sevice door will pop out. Then pull out the service door. Press release knobs and pull out. Remove the brewer. Wash the brewer with fresh water. Dry the brewer afterwards. When lights up, it indicates that the brewer is missing / installed improperly. When is flashing, it indicates that the service door is missing/installed improperly. 6.2 Self-Cleaning WARNING: Please wait to finish the self-cleaning process and then switch off the machine. When is flashing, it indicates that the appliance needs to undergo self-cleaning. The appliance will remain in the best condition if this function is performed at least once a month or more regularly depending on the hardness of water used. You should also 1. Fully fill the water tank. 2. Add one pack of cleaning agent included in the box to the water tank. WARNING: Do not use vinegar or other cleaning agents for the self-cleaning of this appliance. The cleaning agent might damage the appliance. 3. Plug in the appliance. 4. Place a sufficiently large container under the coffee spout and nozzle. 5. In standby, press and hold and the strong espresso button for 5 seconds. You'll hear a beep with and the strong espresso button will flash. 6. Press the strong espresso button to confirm the self-cleaning process. To resume back to the standby, press . 7. If it's flashing, that indicates that the appliance is self-cleaning. 20 / EN Fully Automatic Coffee Machine / User Manual