Beko DFN05320 Owners Manual - Page 32
Programming the washing time
View all Beko DFN05320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
AquaIntense Function (depends on model) AquaIntense impeller located under the lower impeller helps washing your heavily soiled dishes placed in the right side of the lower basket. It will give better results to place the most soiled dish to the right front side. Do not try to remove the AquaIntense impeller! AquaActive Function (Depends on model) This function operates the lower impeller with a higher pressure and higher speed to enable a better washing for dishes such as pans and trays with stubborn, dried soiling. Tablet detergent function (depends on model) Allows to obtain a better drying performance from the multi-purpose detergents called as all in one detergents such as 2in1, 3in1, 4in1, 5in1 and etc., depending on the hardness level of the tap water. If you have used the Tablet features during the last washing programme you used, Tablet function will remain active in the next washing programme you will select. Tablet Detergent function may cause change in the programme duration. Super Rinse Function (Depends on model) Depending on the type of the detergent used, if a detergent dissolving issue is encountered it will remove the resulting stains from the dishes and enables the optimum rinsing performance. TrayWash Function (depends on the model) Select Intensive 70°C programme and press function key to run this function. Floor illumination Warning to show that machine is in washing phase (depends on the model) Your machine reflects a light to the floor during the washing process. This light turns off after the washing process is complete. Floor illumination is activated automatically when the washing programme starts and remains lit until the end of the programme. Floor illumination cannot be cancelled by the user. Programming the washing time Time Delay (Depends on model) You can use the time delay key to delay the start of the selected programme up to 9 hours. Press Start/Pause/Cancel key after setting the Delayed Start. Once the delay time is over, the selected programme will start automatically. Lights of 3-6-9 hours lamps will flash each time you press the time delay key. When you press the Start/Pause/Cancel key while the selected time delay light is flashing, the time delay light will become on and a countdown will start. When the delay time is over, the time delay light will go off and the selected washing programme will start. If you press the Time Delay key while the 9-hour delay light is flashing, the delay lights will go off. If you press the Start/Pause/Cancel key while the Delay Keys are off, the selected programme will start without any delay. 32/EN