Beko DFN05320 Owners Manual - Page 37
Cleaning the impellers, Lower impeller, Upper impeller
View all Beko DFN05320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Cleaning the impellers Clean the impellers at least once a week in order for the machine operates efficiently. Lower impeller Check if the holes on the lower impeller (1) are clogged. If they are clogged, remove and clean the impeller. You can pull the lower impeller up to remove it. (depends on model) Do not try to rotate the impeller by holding its ends. Trying to rotate the end sections may cause the gear system within the impeller to break. Upper impeller Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller. Make sure that the nut is tightened well when installing the upper impeller. Check if the holes on the lower impeller assembly are clogged. If they are clogged, remove and clean the impeller assembly. (depends on model) C To remove and clean the lower impeller assembly together, hold by one hand from the (C) points shown in the figure and pull up to remove. After cleaning, follow these steps in reverse order to reinstall the impeller assembly. 37/EN