Beko DFN05320 Owners Manual - Page 34

Salt indicator Please check the salt indicator to see whether there is adequate amount of softening salt in the dishwasher or not. You need to refill the salt reservoir with salt whenever the no-salt warning symbol lights. Adjusting the water hardness level is explained in Water Softening System section. Rinse Aid indicator Please check the rinse aid indicator to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid dispenser with rinse aid whenever the no rinse aid warning symbol lights. Rinse Aid Amount 1 dose of rinse aid is dispensed. 2 doses of rinse aid are dispensed. 3 doses of rinse aid are dispensed. Position of program selection knob 1 2 3 Rinse Aid Adjustment Indicator Washing lamp on the panel will illuminate. Drying lamp on the panel will illuminate. End lamp on the panel will illuminate. 4 doses of rinse aid are dispensed. 4 No rinse aid dispensed in washing 5 programme. Washing, Drying and End lamps on the panel will illuminate. Washing, Drying and End lamps on the panel will flash at 1-second intervals. Adjusting the amount of rinse aid 1. While the Programme Selection Knob is in "Off" position, press and hold the function key and turn the Programme Selection Knob clockwise by one level, keeping the function key pressed for 2 seconds. At the end of this time, the machine will enter the rinse aid adjustment mode. 2. Once the machine has entered the rinse aid adjustment mode, the stored rinse aid level will be shown on the programme follow-up LEDs for 5 seconds. 3. For the new Rinse Aid setting, set the Programme Selection Knob to the relevant position. 4. Press Start / Pause / Cancel key for once to store the level you have selected. 5. When you set the Programme Selection Knob to the "Off" position again, the machine will enter the normal mode. End of programme End of Programme indicator will light up once the washing programme is over. 1. Press On/Off/Programme Selection key to switch off the product. 2. Close the tap. 3. Unplug the machine from the socket. Leave your dishes in the machine for about 15 minutes after they are washed in order to have them cooled. Your dishes will dry in a shorter time if you leave the door of your machine ajar during this period. This process will increase the drying effectiveness of your machine 34/EN