Beko DFN05320 Owners Manual - Page 35

7- Maintenance and cleaning Read "Safety Instructions" section first! Unplug the product and turn off the tap before attempting any cleaning procedures. Do not use abrasive substances for cleaning. Clean the filter and impellers at least once a week in order for the machine to operate efficiently. Service life of the product extends and frequently faced problems decrease if it is cleaned at regular intervals. Cleaning the filters Clean the filters at least once a week in order for the machine operates efficiently. Check if food residues are left on the filters. If there are food residues on filters, take them out and clean well under running water. 1. Turn the micro filter (1) and coarse filter (2) assembly counter clockwise and pull it out from its seating.(depends on model) Cleaning the outer surface of the product NOTICE Clean the outer surface and door gaskets of the product gently with a mild cleaning material and damp cloth. Wipe the "control panel" only with a damp cloth. Cleaning the interior of the machine • Clean the interior of the machine by operating the machine in the programme 2. Pull out the metal/plastic filter (3) from running at the highest possible the seating. temperature with detergent or special machine cleaning agents monthly. This operation will help removal of leftovers and limescale from the interior of the machine. • If water has remained in the machine, drain the water by performing the procedures under the topic "Cancelling a programme". If the water cannot be discharged, remove the filters as specified in the "Cleaning the filters" section and check if there are any leftover deposits that have accumulated at the bottom of the machine, blocking the water path. Clean if necessary. 3. Press the two pawls on the coarse filter inwards and separate the coarse filter from the assembly. 35/EN