Beko EDC633 User Manual - Page 27

Removing, inner, glass, Replacing

Get Beko EDC633 PDF manuals and user guides View all Beko EDC633 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Removing the door inner glass 1. Open the oven door. 3 12 1 Screw 2 Profile 3 Inner glass pane 4 Plastic slot 2. Take out the screw(1) with a screwdriver 3. Take out the profile (2) than hold up to inner glass (3). 4. Then group the door again, put the glass pane (3) to the plastic slots (4) and group the profile. f the oven door has three glasses, be sure o reattach the inner glass panel. Replacing the oven lamp Ai DANGER: •V Before replacing the oven lamp, make sure that the product is disconnected from mains and cooled down in order to avoid the risk of an electrical shock. Hot surfaces may cause burns! he oven lamp is a special electric light bulb that can resist up to 300 °C. See Technical specifications, page 11 for details. Oven lamps can be obtained from Authorised Service Agents. Position of lamp might vary from the figure. he lamp used in this appliance is not suitable for household room illumination. he intended purpose of this lamp is to assist the user to see foodstuffs. 0 he lamps used in this appliance have to withstand extreme physical conditions such as temperatures above 50 °C. If your oven is equipped with a round lamp: 1. Disconnect the product from mains. 2. Turn the glass cover counter clockwise to remove it. tbit„, 3. Remove the oven lamp by turning it counter clockwise and replace it with the new one. 4. Install the glass cover. 27/EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Removing
the
door
inner
glass
Replacing
the
oven
lamp
1.
Open
the
oven
door.
3
12
1
Screw
2
Profile
3
Inner
glass
pane
4
Plastic
slot
2.
Take
out
the
screw(1)
with
a
screwdriver
3.
Take
out
the
profi
le
(2)
than
hold
up
to
inner
glass
(3).
4.
Then
group
the
door
again,
put
the
glass
pane
(3)
to
the
plastic
slots
(4)
and
group
the
profile.
f
the
oven
door
has
three
glasses,
be
sure
o
reattach
the
inner
glass
panel
.
i
V
A
•
DANGER:
Before
replacing
the
oven
lamp,
make
sure
that
the
product
is
disconnected
from
mains
and
cooled
down
in
order
to
avoid
the
risk
of
an
electrical
shock.
Hot
surfaces
may
cause
burns!
he
oven
lamp
is
a
special
electric
light
bulb
that
can
resist
up
to
300
°C.
See
Technical
specifications,
page
11
for
details.
Oven
lamps
can
be
obtained
from
Authorised
Service
Agents.
Position
of
lamp
might
vary
from
the
figure.
he
lamp
used
in
this
appliance
is
not
suitable
for
household
room
illumination.
he
intended
purpose
of
this
lamp
is
to
assist
the
user
to
see
foodstuffs.
0
he
lamps
used
in
this
appliance
have
to
withstand
extreme
physical
conditions
such
as
temperatures
above
50
°C.
If
your
oven
is
equipped
with
a
round
lamp:
1.
Disconnect
the
product
from
mains.
2.
Turn
the
glass
cover
counter
clockwise
to
remove
it.
tbit„,
3.
Remove
the
oven
lamp
by
turning
it
counter
clockwise
and
replace
it
with
the
new
one.
4.
Install
the
glass
cover.
27/EN