Beko EDC633 User Manual - Page 5

regulations.

Page 5 highlights

maintenance, cleaning and repairing procedures. • If the power connection cable for the product is damaged, it must be replaced by the manufacturer, its service agent or similary qualified persons in order to avoid a hazard. • Only use the connection cable specified in the "Technical specifications". • The appliance must be installed so that it can be completely disconnected from the mains supply. The separation must be by a switch built into the fixed electrical installation, according to construction regulations. • Rear surface of the oven gets hot when it is in use. Make sure that the electrical connection does not contact the rear surface; otherwise, connections can get damaged. • Do not trap the mains cable between the oven door and frame and do not route it over hot surfaces. Otherwise, cable insulation may melt and cause fire as a result of short circuit. • Any work on electrical equipment and systems should only be carried out by authorized and qualified persons. • In case of any damage, switch off the product and disconnect it from the mains. To do this, turn off the fuse at home. • Make sure that fuse rating is compatible with the product. Product safety • The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. • Never use the product when your judgment or coordination is impaired by the use of alcohol and/or drugs. • Be careful when using alcoholic drinks in your dishes. Alcohol evaporates at high temperatures and may cause fire since it can ignite when it comes into contact with hot surfaces. • Do not place any flammable materials close to the product as the sides may become hot during use. • During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven. • Keep all ventilation slots clear of obstructions. • Do not heat closed tins and glass jars in the oven. The pressure that would build-up in the tin/jar may cause it to burst. 5/EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

maintenance,
cleaning
and
repairing
procedures.
If
the
power
connection
cable
for
the
product
is
damaged,
it
must
be
replaced
by
the
manufacturer,
its
service
agent
or
similary
qualified
persons
in
order
to
avoid
a
hazard.
Only
use
the
connection
cable
specified
in
the
"Technical
specifications".
The
appliance
must
be
installed
so
that
it
can
be
completely
disconnected
from
the
mains
supply.
The
separation
must
be
by
a
switch
built
into
the
fixed
electrical
installation,
according
to
construction
regulations.
Rear
surface
of
the
oven
gets
hot
when
it
is
in
use.
Make
sure
that
the
electrical
connection
does
not
contact
the
rear
surface;
otherwise,
connections
can
get
damaged.
Do
not
trap
the
mains
cable
between
the
oven
door
and
frame
and
do
not
route
it
over
hot
surfaces.
Otherwise,
cable
insulation
may
melt
and
cause
fire
as
a
result
of
short
circuit.
Any
work
on
electrical
equipment
and
systems
should
only
be
carried
out
by
authorized
and
qualified
persons.
In
case
of
any
damage,
switch
off
the
product
and
disconnect
it
from
the
mains.
To
do
this,
turn
off
the
fuse
at
home.
Make
sure
that
fuse
rating
is
compatible
with
the
product.
Product
safety
The
appliance
and
its
accessible
parts
become
hot
during
use.
Care
should
be
taken
to
avoid
touching
heating
elements.
Children
less
than
8
years
of
age
shall
be
kept
away
unless
continuously
supervised.
Never
use
the
product
when
your
judgment
or
coordination
is
impaired
by
the
use
of
alcohol
and/or
drugs.
Be
careful
when
using
alcoholic
drinks
in
your
dishes.
Alcohol
evaporates
at
high
temperatures
and
may
cause
fire
since
it
can
ignite
when
it
comes
into
contact
with
hot
surfaces.
Do
not
place
any
flammable
materials
close
to
the
product
as
the
sides
may
become
hot
during
use.
During
use
the
appliance
becomes
hot.
Care
should
be
taken
to
avoid
touching
heating
elements
inside
the
oven.
Keep
all
ventilation
slots
clear
of
obstructions.
Do
not
heat
closed
tins
and
glass
jars
in
the
oven.
The
pressure
that
would
build-up
in
the
tin/jar
may
cause
it
to
burst.
5/EN