Belkin F1DM208T User Manual - Page 16
Before You Begin, Connecting the Primary Switch to First Secondary Switch, Adding Additional
View all Belkin F1DM208T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
INSTALLATION INSTALLATION Before You Begin: 1. Make sure that all computers are powered off and that each MATRIX2 has been assigned a unique BANK address. 2. Place Primary and Secondary switches in the desired location. Make sure all are turned off and unplugged from the power source. 3. Connect the Console monitor, keyboard, and mouse to the Console ports of the Primary switch (BANK 00), as described previously in this installation guide. Connecting the Primary Switch to First Secondary Switch: 4. Using the MATRIX2 daisy-chain cable (F1D9302-XX), connect one end of the cable to the "Input" port on the Primary switch (BANK 00). 5. Connect the other end of the daisy-chain cable to the "Output" port of the Secondary switch (BANK 01). Adding Additional Secondary Switches: 6. Using the daisy-chain cable (F1D9302-XX), connect one end of the cable to the available daisy-chain port labeled "Input" on the Secondary switch (for example, BANK 01). 7. Connect the other end of the daisy-chain cable to the "Output" port of the Secondary switch that you are adding (for example, BANK 02). 8. Repeat steps 6 and 7 for additional MATRIX2s you wish to daisy-chain together. Example of Daisy-Chain Configuration: Cable 1 Primary Unit (BANK 00) Cable 2 Secondary Unit (BANK 01) Cable 3 Secondary Unit (BANK 02) Secondary Unit (BANK 03) 14