Belkin F1DM208T User Manual - Page 27
To update the firmware, you will need the following items, Connecting Computers, Setting the MATRIX2
View all Belkin F1DM208T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
USING YOUR MATRIX2 To update the firmware, you will need the following items: 1. A separate computer running Windows 95, 98, or Me. This computer must not be connected to the CPU ports on the MATRIX2. 2. An available parallel port on the computer. 3. A custom flash cable (DB25 Male-to-RJ45; included with purchase) that connects between the MATRIX2 and the computer. 4. Firmware updates files, available at belkin.com. Connecting Computers: 1. Connect a keyboard, monitor, and mouse to the computer you prepared for firmware update. It must run Windows 95, 98, or Me. 2. Connect the power adapter to the MATRIX2. Be sure that all connected computers are powered off at this moment. 3. Connect the custom flash cable (DB25 Male-to-RJ45; included with purchase). Connect one end of DB25 to your computer's parallel port and the other end of RJ45 to the MATRIX2's flash upgrade jack. Setting the MATRIX2 into Flash Mode: The MATRIX2 has four Flash DIP switches: DIP Switch 1 2 3 4 ON OFF OFF OFF OFF ON OFF OFF ON ON OFF OFF OFF OFF ON OFF ON OFF ON OFF (F1DM216T Only) OFF ON ON OFF (F1DM216T Only) Firmware Main OSD Keyboard 1 Mouse 1 Keyboard 2 Mouse 2 The DIP switch should be set to the specified settings when you are attempting to update a particular firmware. For example, set DIP switch 1 to "ON" to flash update the main firmware of the switch. Note: F1DM216T requires that you flash update two firmwares for the mouse and keyboard, separately. 25