Belkin F1DS102J User Manual - Page 11
Powering Up the Systems
View all Belkin F1DS102J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
section Installing the KVM Switch Powering Up the Systems 1 Once all cables have been connected, power up the CPUs that are attached to the KVM Switch. All computers can be powered on simultaneously. The KVM Switch emulates a mouse and keyboard on each port and allows your 2 computer to boot normally. Your KVM Switch should now be ready for use. You can select which computer to operate by either the direct-access port 3 selectors located on the front panel of the KVM Switch or through keyboard hot-key commands. Note that it will take 1-2 seconds for the video to display after switching. This is due to the refresh of the video signal. There is also 4 re-synchronization of the mouse and keyboard signal that takes place. This is normal operation and ensures that proper synchronization is established. 5 Note: The KVM Switch must be powered up before the computers. 6 7 8 9