Belkin F1DS102J User Manual - Page 13
Hot-Key Preceding Sequence Configuration
View all Belkin F1DS102J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Using the KVM Switch Hot-Key Preceding Sequence Configuration For users who want to use a preceding sequence other than two consecutive 1 Scroll Locks, there is also one convenient way to configure it. 1. Press "ScrollLock" + "ScrollLock" + H, and a beeping sound will signal 2 readiness for a new preceding sequence selection [or press and hold down the center of the last front-panel button (Button 2 or Button 4) until you 3 hear three beeps, then release the button]. 2. Select and press the key you would like to use as your preceding sequence 4 (SCROLL LOCK, CAPS, F12, NUM LOCK, LEFT_CTRL, RIGHT_CTRL keys are available for selection), and you will hear a beep for selection confirmation. Now you can use the new preceding sequence to execute 5 your hot-key commands. Note: Each keystroke within a hot-key sequence should be pressed within 6 two seconds. Otherwise, the hot-key sequence will not be validated. 7 8 section 11