Belkin F1DS102J User Manual - Page 19
Begin the File Upload
View all Belkin F1DS102J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Firmware-Upgrade Guide Begin the File Upload 1 Note: Before hitting the "Upgrade" button on the utility program, you should make sure that you are focused on port 1 of the KVM Switch where you have 2 the computer connected. If not, switch to that computer before hitting the "Upgrade" button. 3 Step 7. 4 After you click the "Upgrade" button, the file-transfer progress will begin in seconds and can be monitored through the advancement of the progress bar. Wait until the progress bar runs to its full length for the upgrade process to be completed. 5 6 Note: Meanwhile, be careful not to power off the computer or disconnect 7 the USB-cable connection. Otherwise, the file upload will be interrupted and the upgrade process will be aborted. If that does happen, please refer to the "Firmware-Upgrade Troubleshooting" section. 8 section The file upload is finished when the progress bar runs through 100 percent and a prompt tells you that the upgrade is OK. Click "OK". The firmware-upgrade process is complete. 17