Belkin F5D5230-4 User Guide - Page 41
Troubleshooting - problem
View all Belkin F5D5230-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Troubleshooting Problem I cannot access the web-based Router setup utility when typing the correct address: 192.168.2.1 Possible Cause/Solution 1. Accessing the Router setup utility can take up to 15 seconds. Be sure that you wait long enough. 2. Check the connection between the PC and the Router making sure that the network cable is connected to any port labeled LAN. 3. Check the LAN link light on the front of the Router. The light that corresponds to the port that the computer is connected to should be illuminated. If it is not, check your connection or network interface card. 4. Open the IP configuration panel (described earlier in this manual). Select your adapter and press "Release". After the IP address has been released, click "Renew". Your computer should obtain an IP address from the Router. 5. Reset the Router and begin again perform the above step again. 39