Belkin F5D5230-4 User Guide - Page 6
Front Panel, Rear Panel - reset
View all Belkin F5D5230-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Product Descriptions Front Panel Power LED-When lit, this light indicates that the unit is receiving power WAN Link Status • GREEN - indicates that there is an active connection with the Cable or DSL modem. If this light is off, the link is not established. • FLASHING GREEN - When the WAN link status light is flashing green, data is flowing between the Router and the Cable or DSL modem. Port Activity/Status Lights • AMBER-Solid amber indicates that there is a 100Mbps (100Base-TX) link between the Router and the computer connected to that port. • GREEN-Solid green indicates that there is a 10Mbps (10Base-TX) link between the Router and the computer connected to that port. • FLASHING-When a port status light is flashing either amber or green, data is flowing between the Router and the computer connected to that port. Rear Panel Power Input Jack-Connect the DC power supply WAN Port-Connect the network cable from the Cable or DSL modem to the WAN port LAN Ports-Numbered 1 - 4. Connect the network cable from your PCs to these ports. Note: they do not need to be connected sequentially. For example, in a two-computer network you can connect one computer to Port 4 and another to Port 1. Reset Button-If the Router stops functioning properly, you can power off and on the Router, without losing your settings. Press and hold the RESET button for 2 seconds. The power light will begin blinking and the port lights may blink. When the lights stop blinking, the Gateway Router has been reset. 4