Belkin F5D5230-4 User Guide - Page 43

Since your connection type

Page 43 highlights

Troubleshooting Problem My connection type is Dynamic IP Address. I cannot connect to the Internet. My connection type is PPPoE. I cannot connect to the Internet. Possible Cause/Solution 1. Make sure your computers are correctly configured and all network cables are properly connected. 2. Make sure the cable or DSL line is properly attached on your Cable or DSL modem. Refer the manual of your modem to verify that it works normally. 3. Make sure the network cable between modem and the router is well connected. Power off the modem; wait a few seconds and then power it on again. 1. Since your connection type is PPPoE, your ISP will assign you an account name and password and service name. Make sure the Router connection type is configured as PPPoE and fill these settings are entered properly. 2. Make sure your computers are correctly configured and all network cables are properly connected. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

Troubleshooting
My connection type is Dynamic
IP Address. I cannot connect to
the Internet.
My connection type is PPPoE. I
cannot connect to the Internet.
1. Make sure your computers
are correctly configured and
all network cables are
properly connected.
2. Make sure the cable or DSL
line is properly attached on
your Cable or DSL modem.
Refer the manual of your
modem to verify that it
works normally.
3. Make sure the network cable
between modem and the
router is well connected.
Power off the modem; wait a
few seconds and then power it
on again.
1. Since your connection type
is PPPoE, your ISP will assign
you an account name and
password and service name.
Make sure the Router
connection type is configured
as PPPoE and fill these settings
are entered properly.
2. Make sure your computers
are correctly configured and
all network cables are
properly connected.
Problem
Possible Cause/Solution
41