Belkin F5D7130 User Manual - Page 8
Power Jack, RJ45 Ethernet Jack, Reset Button, Resetting the WAP, b. Restoring the Factory Defaults, - access point
UPC - 722868455647
View all Belkin F5D7130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
KNOWING YOUR WIRELESS ACCESS POINT Rear Panel Power Jack Antennas RJ45 Ethernet Jack Reset Button Power Jack Connect the included 5V DC power supply to this jack. RJ45 Ethernet Jack Connect an Ethernet cable to this socket, and connect to an open RJ45 10Base-T or 100Base-T port on a switch, hub, or WAP. Reset Button The "Reset" button is used in rare cases when the WAP may function improperly. Resetting the WAP will restore the WAP's normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password. a. Resetting the WAP Push and release the Reset button. The lights on the WAP will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the reset is complete. b. Restoring the Factory Defaults Press and hold the Reset button for five seconds then release it. The lights on the WAP will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the restore is complete. Rotatable Dual Dipole Antennas Two unidirectional dipole antennas are located on the side of the WAP. The antennas can rotate 360 degrees. The antennas should be oriented in the vertical position for best performance. 6