Belkin F6D3010 User Manual - Page 4

Placement of your Wireless Networking Hardware for, Optimal Performance

Page 4 highlights

Introduction Placement of your Wireless Networking Hardware for Optimal Performance Your wireless connection will be stronger the closer your computer is to your router (or access point). Typical indoor operating range for wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your router (or access point) and connected devices increases. This may or may not be noticeable to you. As you move farther from your router (or access point), connection speed may decrease. Factors that can weaken signals simply by getting in the way of your network's radio waves are metal appliances or obstructions, and walls. If you have concerns about your network's performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the router (or access point) in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support. Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help. 1. Wireless Router or Access Point Placement Place your router (or access point), the central connection point of your network, as close as possible to the center of your wireless network devices. To achieve the best wireless network coverage for your "wireless clients" (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): • Ensure that your router's (or access point's) networking antennas are parallel to each other, and are positioned vertically (toward the ceiling). If your router (or access point) itself is positioned vertically, point the antennas as much as possible in an upward direction. • In multistory homes, place the router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the router (or access point) on an upper floor. • Try not to place the router (or access point) near cordless 2.4GHz and 5GHz phones. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

2
Introduction
Placement of your Wireless Networking Hardware for
Optimal Performance
Your wireless connection will be stronger the closer your computer
is to your router (or access point). Typical indoor operating range
for wireless devices is between 100 and 200 feet.
In the same way, your wireless connection and performance will
degrade somewhat as the distance between your router (or access
point) and connected devices increases. This may or may not be
noticeable to you. As you move farther from your router (or access
point), connection speed may decrease. Factors that can weaken
signals simply by getting in the way of your network’s radio waves
are metal appliances or obstructions, and walls.
If you have concerns about your network’s performance that might
be related to range or obstruction factors, try moving the computer
to a position between five and 10 feet from the router (or access point)
in order to see if distance is the problem. If difficulties persist even at
close range, please contact Belkin Technical Support.
Note:
While some of the items listed below can affect network
performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating
at its maximum effectiveness, this checklist may help.
1.
Wireless Router or Access Point Placement
Place your router (or access point), the central connection point
of your network, as close as possible to the center of your
wireless network devices. To achieve the best wireless network
coverage for your “wireless clients” (i.e., computers enabled
by Belkin Wireless Notebook Network Cards, Wireless Desktop
Network Cards, and Wireless USB Adapters):
Ensure that your router’s (or access point’s) networking antennas
are parallel to each other, and are positioned vertically (toward the
ceiling). If your router (or access point) itself is positioned vertically,
point the antennas as much as possible in an upward direction.
In multistory homes, place the router (or access point) on a
floor that is as close to the center of the home as possible.
This may mean placing the router (or access point) on an
upper floor.
Try not to place the router (or access point) near cordless 2.4GHz
and 5GHz phones.