Belkin F8T030 F8T030 Manual - English - Page 13
Connect the included power adapter into an available power outlet. Attach the barrel - user guide
![]() |
UPC - 722868384718
View all Belkin F8T030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HARDWARE INSTALLATION Connect the included power adapter into an available power outlet. Attach the barrel plug into the power jack of the AP. You should see the power LED light turn on, the system light blink a few times, and then the system, LAN, USB 1, USB 2, and Bluetooth lights will blink repeatedly as the AP initiates itself. The initiation process will take approximately 20 seconds. TIP: The system LED blinks once per second indicating that the AP is functioning properly. The system light will blink three times per second if the IP address has not been set. If any lights other than the power light remain solid, there is some problem with the unit. Consult the troubleshooting guide at the end of your User Manual. 12
![](/manual_guide/products/belkin-f8t030-f8t030-manual-english-88b1f81/13.png)
Connect the included power adapter into an available power outlet. Attach the barrel
plug into the power jack of the AP. You should see the power LED light turn on, the
system light blink a few times, and then the system, LAN, USB 1, USB 2, and
Bluetooth
lights will blink repeatedly as the AP initiates itself. The initiation process
will take approximately 20 seconds.
TIP: The system LED blinks once per second indicating that the AP is functioning
properly. The system light will blink three times per second if the IP address has not
been set. If any lights other than the power light remain solid, there is some problem
with the unit. Consult the troubleshooting guide at the end of your User Manual.
HARDWARE INSTALLATION
12