Beltronics RX75 Owner's Manual - Page 2

Congratulations and Important Warning Congratulations Your new Bel Pro Remote is the most advanced custom-installed radar/laser detector available. The Bel Pro Remote includes longrange X, K, and SuperWide Ka radar capability, improved Digital Signal Processing for superior range and reduced false alarms, our patented Mute and AutoMute, audible and visual band alerts, and all the performance you'd expect from Beltronics. In addition, your new Bel Pro Remote introduces a new level of Radar/Laser defense including: • Blistering radar performance, for superior K, and Ka-band sensitivity • Advanced Programming lets you instantly set up to 8 customized features • Exclusive AutoScan™ mode drastically reduces false alarms, plus Highway and City settings • Ultra-bright alphanumeric display uses 280 LEDs for crystal clear information • Exclusive Threat Display™ tracks and displays multiple radar signals and signal strength • Exclusive TechDisplay™ provides numeric frequency for any radar signal • Detects and decodes up to 64 Safety Warning Systems signals • Standard remote Mute button provides one-touch Mute, and volume adjustment • Optional Laser Pro 904 compatible If you've used a radar detector before, a Review of the Quick Reference Guide on page 4, and the Programming information on pages 10 and 11 will briefly explain the new features. If this is your first detector, please read the manual in detail to get the most out of your new RX75's performance and features. Please drive safely. IMPORTANT INSTALLATION WARNING Your new RX75 must be installed by a professional. Car Audio specialists and many car dealers can install the RX75 for you. Attempting to install the Bel Pro Remote without expertise in automotive electronic installations can cause personal injury during the installation, or can damage your RX75 or your vehicle. If your vehicle is damaged during installation, its safety systems may be compromised, which could cause personal injury or property damage. FCC Note: Modifications not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment. I 1 Quick Reference Card ̄ Remove card along perforations ̄ ̄ Remove card along perforations ̄ Bel Pro Remote Quick Reference Card There are 8 user-selectable options so you can customize your RX75 for your own preferences. The buttons labeled CITY and VOL/MUTE are also used to enter the Program Mode, REVIEW your current program settings, and to CHANGE any settings as desired. The words PGM, REV and CHG are located on the front of the display. How to use Programming 1 To enter Program Mode, press and hold both buttons down for 2 seconds. (The unit will beep twice, and will display the word "Program"). An example of Programming Here is how you would turn RX75's AutoMute feature off. 1 Enter the Program Mode by holding both the CITY and VOL/MUTE buttons down for 2 seconds. The RX75 will beep twice and display Program. 2 Press and hold the REV button. The RX75 will scroll through the categories, starting with Power-on indication (Pilot), then Power-on sequence (PwrOn), then Signal strength meter (Meter), and then AutoMute (aMute). 2 Then press the REV button to REVIEW the current settings. (You can either tap the button to change from item to item, or hold the button to scroll through the items). 3 Press the CHG button to change any setting. (You can either tap the button to change from setting to setting, or hold the button to scroll through all the options). 3 Release the REV button when the RX75 shows the AutoMute item. Since the factory setting is for AutoMute to be on, the RX75 will display aMute ON. (If you accidentally don't release the REV button in time, and the RX75 goes to the next category, hold the REV button down again, and after the RX75 scrolls through all categories, it will begin again at the top of the list.) 4 To leave Program Mode, simply wait 8 seconds without pressing any button. (The unit will display Complete, beep 4 times, and return to normal operation). Factory Default Settings To reset RX75 to its original factory settings, press and hold the "CITY" and "VOL/MUTE" buttons while turning the power on. The RX75's display will provide a "Reset" message, accompanied by an audible alert, acknowledging the reset. 4 Press the CHG button to change from aMute ON to aMute OFF. 5 To complete the Programming, simply wait 8 seconds without pressing any button. The RX75 will display Complete, beep 4 times, and return to normal operation. Programming Details ̈