Beltronics STi Driver Owner's Manual - Page 4
Quick Reference Guide - detector
UPC - 065789250015
View all Beltronics STi Driver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Quick Reference Guide To begin using your STi DRIVER, just follow these simple steps 1 Plug the small end of the power cord into the side jack of the detector, and plug the large end of the power cord into your vehicle's lighter socket. 2 Mount your STi DRIVER on the windshield using the supplied windshield mount. 3 Press the PWR button, located on the left side of the front panel, to turn the STi DRIVER on. 4 Press and hold the VOLUME/MUTE button to adjust the volume level. Please read the manual to fully understand STi DRIVER's operation and features. QuickMount Slot Insert STi DRIVER's adjustable Windshield mount into this slot. Page 7 QuickMount Button Press the button, and slide the Windshield mount into one of its four locking positions. Page 7 Power Press the PWR button to turn the STi DRIVER on or off. AutoMute STi DRIVER's patented AutoMute automatically reduces the volume level of the audio alert after a brief period. If you prefer, you can turn AutoMute off. Page 8 Programming The STi DRIVER is ready to go, just plug it in and turn it on. But you can also easily change 9 features for your preferences. Pages 12-16 4 Radar Antenna and Laser Lens The rear panel of your STi DRIVER should have a clear view of the road ahead. For best performance, do not mount the STi DRIVER directly behind windshield wipers or tinted areas. Page 6 Alphanumeric Display The STi DRIVER's display will show Highway, AutoScan, City, or City NoX as its power-on indication. If you prefer, you can choose other power-on indications. Pages 12-15 During an alert, the display will indicate the radar or laser band, and a precise bar graph of signal strength. Page 10 Note: In the Dark Mode the display will not light during an alert. Page 9 Rear Laser Port Receives laser signals from behind the vehicle. Power Jack Plug the power cord into this connector. Page 6 Earphone Jack Accepts standard 3.5mm mono earphone. VOLUME/MUTE Button Press and hold the VOLUME/MUTE button (below the display) to adjust the alert volume level. Briefly press this button to silence the audio for a specific alert. (The audio will alert you to the next encounter.) Page 8 Sensitivity Button (SENS) Switches between Highway, AutoScan, City and City NoX settings. In general, we recommend the AutoScan mode. Page 9 5