BenQ DC X600 User Manual - Page 15
Setting the shooting functions
![]() |
View all BenQ DC X600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
English BenQ DC 5530 User's Manual 1. Press the zoom button in Capture mode. Tele: makes the subject bigger. Wide: makes the subject smaller. When the digital zoom function is disabled, you can take pictures at up to three times magnification using the optical zoom. When the digital zoom function is enabled, you can further enlarge the subject to a maximum magnification equivalent to 12 times. • You cannot use the optical zoom when taking movies. 3.4.5 Setting the shooting functions 198 Zoom bar Digital zoom range 3.4.5.1 Selecting the focus mode Focus modes Autofocus mode Macro mode Pan Focus mode Infinity-Landscape mode The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. Use this mode when the distance to the subject is more than 40 cm. This mode is used when the distance to the subject is approx. 15 cm - 50 cm. The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. This mode is used when the distance to the subject is approx. more than 0.15 m at wide angle and approx. more than 0.4 m at tele angle. The focus is set from close to infinite range. This mode is used when shooting close and distant subjects together or the subject is hard to focus on. This mode is used for taking distant objects. Manual Focus mode Adjust the focus manually with the four-way controller. 3.4.5.2 Selecting the flash mode Flash modes Auto The flash discharges automatically depending on the light conditions. Flash Off Flash On The flash will not discharge, regardless of the brightness. Use this mode to take pictures at dusk or in museums etc. where flash photography is prohibited. The flash discharges regardless of the brightness. Auto + Red-eye This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject's eyes. The flash discharges automatically. Flash On + red-eye Soft Flash This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject's eyes. The flash will discharge regardless of lighting conditions. This mode reduces the intensity of the flash so that the flash is not too bright even when fired at close range. The flash will discharge regardless of the light conditions. • The flash is off when the Capture mode is set to (Movie mode), Continuous Shoot- ing, or Infinity-Landscape. • The flash discharges a total of three times, two pre-flashes (It may look like one flash to your eye) and the third time to take the pictures. (In the red-eye reduction modes, the interval between the pre-flashes and the last flash is longer.) Using the DC X600 11
![](/manual_guide/products/benq-dc-x600-user-manual-45e1a93/15.png)