BenQ DC X600 User Manual - Page 9
Turning the camera on and off, Operating the mode palette - controller
![]() |
View all BenQ DC X600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English BenQ DC 5530 User's Manual USING THE DC X600 3.1 Turning the camera on and off 1. Press the power switch. The power indicator is illuminated by a green light. The lens extends and the camera turns on in the Capture mode. The camera is ready to take pictures by pressing the shutter release button. • Press the Playback button to switch to the Playback mode and view pictures while the lens is extended. • Hold down the Playback button for two seconds to activate the Playback mode with the lens retracted. • Hold down the Playback button for more than four seconds to display the con- tents of the pictures stored in the built-in memory with the SD memory card inserted. • When capturing an image, press the shutter release button halfway. The focus frame on the LCD monitor will light green when the camera is in focus. Then, press the shutter release button fully. The picture is taken. 2. Press the power switch again. The camera turns off. 3.2 Operating the mode palette Once you press the four-way controller (T), the mode palette appears on the LCD monitor. You can edit an image or change the settings of the camera. 3.2.1 How to operate the mode palette The guide display is indicated while using the mode palette. 1. Press the four-way controller (T). In Capture mode, the Capture mode palette appears. In Playback mode, the Playback mode palette appears. 2. Use the four-way controller (S T W X) to choose an item. 3. Press the OK button. The screen for each mode appears. Using the DC X600 5
![](/manual_guide/products/benq-dc-x600-user-manual-45e1a93/9.png)