BenQ EH600 User Manual - Page 120
Connecting a flash drive, USB-1, File Manager, All Files
View all BenQ EH600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
External Storage Connections Connecting a flash drive Connect a USB-A flash drive to the USB-1 or USB-2 port at the rear of the projector to play files stored on the flash drive. • If you want to play media from a flash drive while the projector is set to the HDMI or PC input source, you must first return to the BenQ Launcher interface by pressing the source button the remote control and then selecting BenQ Launcher. or the LAUNCHER button on • A red dot will appear above the USB icon in the Source menu anytime a USB-A flash drive is connected to the projector. To play files stored on a flash drive: 1. Connect the USB-A flash drive to the USB-1 or USB-2 port at the rear of the projector. 2. A pop-up notification from the File Manager app will appear indicating that a storage device is detected. Select All Files and press OK to open the device. • If you do not want to open the media file immediately after connecting the storage device, press the back button to remain on the current screen. • If you are trying to open a media file from a storage device that was already previously connected, select USB in the Source menu, press OK, and select All Files. 120 Appendix: Operation (under Launcher source) for firmware version before v01.00.19.00