BenQ EH600 User Manual - Page 96
Extending lamp life, Advanced Menu - Settings - specs
View all BenQ EH600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Time used in LampSave mode = a hours 2. Equivalent light source hour = α hours α = x(A' / X) + y(A'/Y) + z(A'/Z) + a(A'/A), if X= lamp life spec of Normal mode Y= lamp life spec of Economic mode Z= lamp life spec of SmartEco mode A= lamp life spec of LampSave mode A' is the longest lamp life spec among X, Y, Z, A When you calculate Equivalent Lamp hour manually, it will probably have deviation from the value shown in OSD menu since projector system calculates time used for each lamp mode in "Minutes" then rounds down to an integer in hours shown in OSD. For time used in each lamp mode shown in OSD menu: • Time used is accumulated and rounded down to an integer in hours. • When time used is less than 1 hour, it shows 0 hours. To obtain the lamp hour information: 1. Go to Advanced Menu - Settings > Light Settings and press OK. The Light Settings page appears. 2. Press to select Light Usage Time and press OK. The Light Usage Time information is displayed. You can also get the lamp hour information on the Information menu. Extending lamp life • Setting the Light Mode Go to Advanced Menu - Settings > Light Settings > Light Mode and select a suitable lamp power from among the provided modes. Setting the projector in Economic, SmartEco or LampSave mode extends lamp life. Lamp mode Normal Economic SmartEco LampSave Description Provides full lamp brightness Lowers brightness to extend the lamp life and decreases the fan noise Adjusts the lamp power automatically depending on the content brightness level while optimizing display quality Adjusts the lamp power automatically depending on the content brightness level while offering a longer lamp life • Setting Auto Power Off This function allows the projector to turn off automatically if no input signal is detected after a set period of time to prevent unnecessary waste of lamp life. To set Auto Power Off, go to Advanced Menu - Settings > Operation Settings > Power On/Off Settings > Auto Power Off and press / . 96 Maintenance