BenQ FP241W User Manual - Page 31

Input /Swap hot key Press the Input/Swap key continually to select an input source for the main window or swap the input signals between the main window and the PIP window when the PIP function is activated. To specify the input source, release the key when you see the message of the preferred input source, which will be lasting for around 3 seconds. The setting will take effect immediately. • When the PIP function is OFF, select between the computer graphic/PC video input sources and video input sources. To specify the input signal, release the key while the message displays. The input signal messages will be displayed in sequence as below: The Computer Graphic/PC Video input sources include D-sub, DVI, HDMI, and Component, while the Video input sources include Composite and S-video. • When the PIP function is ON, select between various input sources of the current video type (Computer Graphic/PC video or Video) for the main window. The cycle will be performed in a specific sequence. Keeping pressing the key will swap the current main window's signal source with the current PIP window's signal source. To specify the input signal, release the key while the message displays. If the current main window source is from the Computer Graphic/PC video input signals, the input signal messages will be displayed in sequence as below: If the current main window source is from the Video input signals, the input signal messages will be displayed in sequence as below: The PIP function will not allow for 2 computer graphic/PC video sources or 2 video sources to perform PIP. To specify an input video source for the PIP window, press Enter to make a selection. See also PIP hot key on page 29 How to adjust your monitor 31