BenQ PD2705UA User Manual - Page 51
Switching to different video sources, KVM Switch, Input, Signal Input
View all BenQ PD2705UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3. After two or more sets of connections are made properly, the KVM Switch function is enabled automatically. You can find out the status from the OSD menus. On the main menu, the KVM status is displayed. On the Input hotkey menu, a KVM icon is displayed. B-C B 1 DisplayPort B 2 HDMI DisplayPort HDMI None KVM Switch: ON If KVM is not working please check: 1. Cables are connected to both PC and monitor 2. Change Video Input selection in third column Input KVM USB-C DisplayPort HDMI 1 2 Switching to different video sources Once the KVM connections have been made properly, you can press the default hot keys to cycle through available KVM sources easily. The way to switch KVM may vary by the way the sources are connected. You are recommended to follow the instructions in different scenarios from page 53 to switch quickly. Switch by the custom key 2 on the rear of the monitor The custom key 2 is set to Input (Signal Input) by default. If KVM Switch is enabled, the Input hotkey menu will be marked with a KVM icon. Press the key repeatedly to cycle through available options. Input KVM USB-C DisplayPort HDMI 1 2 The switch also works if you have set custom key 2 to KVM Switch. Switch of KVM sources by the KVM Switch hot key is required when you have two monitors and computers as described in Scenario C: Working with two computers and two monitors on page 54. 51