BenQ PD2705UA User Manual - Page 53
Scenario A: Working with two computers and one monitor, Scenario B: Working in PBP mode, KVM Switch
![]() |
View all BenQ PD2705UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Switch from the KVM Switch menu Go to KVM Switch to manually select a source. Mode: Adobe RGB Display Color 2 KVM Switch Audio Custom Key System USB-C USB 1 DisplayPort USB 2 HDMI DisplayPort HDMI None KVM Switch: ON If it can't use KVM, please check 1. Input Source is connected 2. Select the correct physical input source for USB Back Move Confirm Scenario A: Working with two computers and one monitor USB-C in control Switched to be DP in control or (USB-C) (DP + USB 1 Upstream) 1. Establish cable connection to enable KVM function as instructed in Establishing KVM connections on page 50. 2. Go to System > Power Awake and make sure it is set to ON. 3. Press the custom key 2 (as the hot key for Input by default) or the rotation key on Hotkey Puck Gen 2 (as the hot key for KVM Switch by default) to switch. Scenario B: Working in PBP mode USB-C in control Switched to be DP in control (USB-C) (DP + USB 1 upstream) 1. Establish cable connection as instructed in Establishing KVM connections on page 50. 2. Go to System > Power Awake and make sure it is set to ON. 53
![](/manual_guide/products/benq-pd2705ua-user-manual-dfe0cea/53.png)