BenQ RP702 RP702 User Manual - Page 10

Setting up the display, Mounting the display

Get BenQ RP702 PDF manuals and user guides View all BenQ RP702 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

6 Setting up the display Setting up the display Mounting the display You can install the display on a vertical surface with a suitable wall mounting bracket or on a horizontal surface with the optional desktop stands. Please pay attention to the following notes during installation: • This display should be installed by at least two adult persons. Attempting to install this display by only one person may result in danger and injuries. • Refer the installation to qualified technicians. Improper installation may cause the display to fall or malfunction. Installing the display on a wall 1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface. Make sure that the size of the cloth is larger than the display. 2. Gently lay the display on the cloth with the LCD screen facing down. 3. Remove the desktop stands from the display if installed. 4. Identify the wall mounting screw holes on the back of the display as shown in the illustration. *Screw type: M6 *Screw type: M8 *Screw type: M8 RP652 RP702 5. Install the wall mounting bracket on the display and attach the display to the wall according to the mounting bracket's instructions. The length of LCD display the screw should exceed the thickness of the wall mounting bracket by at least 10 mm. Make sure that all screws are tightened and secured properly. (Recommended torque: 470 635N•cm). The mounting means should be strong enough to bear the weight of the display. RP790 Thickness of the wall mounting bracket 10 mm (0.39")

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Setting up the display
6
Setting up the display
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting bracket or
on a horizontal surface with the optional desktop stands. Please pay attention to the
following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
Installing the display on a wall
1.
Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2.
Gently lay the display on the cloth with the LCD screen facing down.
3.
Remove the desktop stands from the display if installed.
4.
Identify the wall mounting screw holes on the back of the display as shown in the
illustration.
5.
Install the wall mounting bracket on
the display and attach the display to
the wall according to the mounting
bracket’s instructions. The length of
the screw should exceed the
thickness of the wall mounting
bracket by at least 10 mm. Make
sure that all screws are tightened
and secured properly.
(Recommended torque: 470 -
635N•cm). The mounting means
should be strong enough to bear
the weight of the display.
RP652
RP702
RP790
*Screw type: M6
*Screw type: M8
*Screw type: M8
Thickness of
the wall
mounting
bracket
10 mm
(0.39")
LCD display