BenQ RP702 RP702 User Manual - Page 19

Connection, Connecting audio/video signals

Get BenQ RP702 PDF manuals and user guides View all BenQ RP702 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Connection 15 Connection Connecting audio/video signals Pay attention to the following notes when you connect cables: • Please turn off all devices. • Familiarize yourself with the audio/video ports on the display and the devices you want to use. Be aware that incorrect connections may adversely affect picture quality. • Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the connectors at the end of the cable. • Ensure that all cables are fully inserted and firmly seated. Connecting the VGA input 1. Connect the VGA jack on the display to the VGA output jack on a computer using a D-Sub (15-pin) cable. 2. Connect the computer's audio output jack to the PC AUDIO jack on the display using a suitable audio cable. 3. To view images from this input, press the INPUT button on the remote control and select VGA. D-Sub (15-pin) cable Audio cable Computer The audio cable is not supplied and should be purchased separately.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Connection
15
Connection
Connecting audio/video signals
Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want
to use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull
the connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.
Connecting the VGA input
1.
Connect the
VGA
jack on the display to the VGA output jack on a computer using a
D-Sub (15-pin) cable.
2.
Connect the computer’s audio output jack to the
PC AUDIO
jack on the display
using a suitable audio cable.
3.
To view images from this input, press the
INPUT
button on the remote control and
select
VGA
.
The audio cable is not supplied and should be purchased separately.
D-Sub (15-pin) cable
Audio cable
Computer