BenQ RP702 RP702 User Manual - Page 32

Setting up Internet connection, Wired Connection

Get BenQ RP702 PDF manuals and user guides View all BenQ RP702 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

28 Basic operations Setting up Internet connection Your display must be connected to the network to download updates or surf the Internet. To find the MAC address in Android OS, please go to Settings > Network > Status. Wired Connection 1. Connect one end of the Ethernet cable to the LAN port of the display. 2. Connect the other end of the Ethernet cable to the LAN port of the router. 3. Press the INPUT button on the remote control and select ANDROID. 4. On the home screen, select All Apps ( ) > Settings ( ) > Network. 5. In the Network menu, select Wired. 6. In the Wired menu, set Open Ethernet to On to configure the network settings. Then do the following: - If the router setting enables obtaining IP address automatically, select The Automatic Acquisition IP Address and press the OK button. Your display will obtain the IP address automatically. - Otherwise, do the following to manually configure the network: a. Select IPv6 and press the OK button to enable/disable IPv6. b. Select IP Address and assign a valid IP address for the device. c. Select Subnet Mask and assign a subnet mask of the IP address for the device. d. Select Default Gateway and assign a valid gateway for the device. e. Select First DNS and Second DNS, and then assign a valid DNS server address for the device. f. Select save and press the OK button. A successful message appears on the screen. Wireless Connection This display only supports BenQ WDRT8192 WiFi dongle. Please contact your local dealer for more information on configuring the wireless connection.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Basic operations
28
Setting up Internet connection
Your display must be connected to the network to download updates or surf the
Internet.
Wired Connection
1.
Connect one end of the Ethernet cable to the LAN port of the display.
2.
Connect the other end of the Ethernet cable to the LAN port of the router.
3.
Press the
INPUT
button on the remote control and select
ANDROID
.
4.
On the home screen, select
All Apps
(
) >
Settings
(
) >
Network
.
5.
In the
Network
menu, select
Wired
.
6.
In the
Wired
menu, set
Open Ethernet
to
On
to configure the network settings.
Then do the following:
-
If the router setting enables obtaining IP address automatically, select
The
Automatic Acquisition IP Address
and press the
OK
button. Your display will
obtain the IP address automatically.
-
Otherwise, do the following to manually configure the network:
a. Select
IPv6
and press the
OK
button to enable/disable IPv6.
b. Select
IP Address
and assign a valid IP address for the device.
c. Select
Subnet Mask
and assign a subnet mask of the IP address for the device.
d. Select
Default Gateway
and assign a valid gateway for the device.
e. Select
First DNS
and
Second DNS
, and then assign a valid DNS server
address for the device.
f. Select
save
and press the
OK
button. A successful message appears on the
screen.
Wireless Connection
This display only supports BenQ WDRT8192 WiFi dongle. Please contact your local
dealer for more information on configuring the wireless connection.
To find the MAC address in Android OS, please go to
Settings
>
Network
>
Status
.