BenQ TK850 User Manual - Page 35
side of the projector until the lamp cover loosens., Lift the handle so that it stands up.
View all BenQ TK850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2. Loosen the screw(s) that secure the lamp cover on the side of the projector until the lamp cover loosens. 3. Remove the lamp cover from the projector. • Do not turn the power on with the lamp cover open. • Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries 4. Remove the safety mylar. 5. Disconnect the lamp connector. 6. Loosen the screw(s) that secure the inner lamp. 7. Lift the handle so that it stands up. 8. Use the handle to slowly pull the lamp out of the projector. • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. • Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. The sharp edges inside the projector may cause injuries. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 9. Insert the lamp connector. 5 4 6 7 Maintenance 35