BenQ W1210ST User Manual - Page 17
No Signal, SOURCE, Keystone, Auto Source, Menu Type
View all BenQ W1210ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Step 3: Specify Keystone. For more information about keystone, see Correcting keystone. Step 4: Specify Auto Source. Select On if you want the projector to always search for available signals automatically when the projector is turned on. Step 5: Specify Menu Type. For more information about menu types, see About the OSD Menus. Now you've completed the initial setup. 4. If you are prompted to enter the password, use the arrow keys on the projector or remote control to enter a six-digit password. See Utilizing the password function for details. 5. Switch on the connected equipment. 6. The projector starts to search for available input signals. The current input signal being scanned is displayed on the screen. If the projector does not detect a valid signal, the "No Signal" message appears. You may press SOURCE on the projector or remote control to select your desired input signal. 7. If the horizontal frequency of the input source exceeds the range of the projector, the "No Signal" message is displayed on the screen. It will remain on-screen until you change the horizontal frequency of the input source to an appropriate one. Operation 17