BenQ W1210ST User Manual - Page 35
Audio Setup menu, Continued, Reset Current, Picture Mode, Sound Mode, Volume, Power On/Off, Ring Tone
View all BenQ W1210ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Advanced... (Continued) Reset Current Picture Mode • Fast Mode Reduces frame delay. The lag between the signal input and output will be minimized to the lowest level. Select an HDMI signal at 1080p/60Hz to use this function. Aspect Ratio will be set to Auto, and Overscan Adjustment will be set to 0 during operation. • Film Mode Enhances picture quality when projecting composite image from a filmsourced DVD or Blu-ray Disc. Setting Off disables the function. All of the adjustments you've made for the selected Picture Mode (including preset modes, and User) return to the factory preset values. 1. Press OK. The confirmation message is displayed. 2. Use / to select Reset and press OK. The picture mode returns to the factory preset settings. 3. Repeat steps 1 and 2 if you want to reset other picture modes. Audio Setup menu Submenu Sound Mode Mute Volume Functions and Descriptions • Effect Mode Sound Mode function utilizes MaxxAudio sound enhancement technology, which incorporates Waves's algorithms to deliver great effects of the bass and treble and provide you with immersive cinematic audio experience. The following preset sound modes are provided: Standard, Cinema, Music, Sport, Game, and User. The User mode allows you to personalize the sound settings. When selecting the User mode, you may make manual adjustments with the User EQ function. If the Mute function is activated, adjusting Sound Mode will turn off the Mute function. • User EQ Select desired frequency bands (100 Hz, 300 Hz,1k Hz, 3k Hz, and 10k Hz) to adjust the levels according to your preference. The settings made here define the User mode. Select On to temporarily turn off the projector's internal speaker or the volume being output from the audio output jack. To restore the audio, select Off. The function is accessible through the remote control. Adjusts the volume level of the projector's internal speaker or the volume being output from the audio output jack. If the Mute function is activated, adjusting Mute will turn off the Mute function. Power On/Off Ring Tone Reset Audio Settings The function is accessible through the remote control. Sets the ring tone for the projector On or Off. The Power On/Off Ring Tone can only be adjusted here. Setting the sound mute or adjusting the sound level do not affect the Power On/Off Ring Tone. All of the adjustments you've done under the Audio Setup menu return to the factory preset values. Menu Functions 35