BenQ W710ST W700 & W710ST user manual - Page 34
Magnifying and searching for details, Playing 3D function
View all BenQ W710ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
English 5. Press to correct keystoning at the top of the image or press to correct keystoning at the bottom of the image. KEYSTONE 6 MENU Back Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. 1. Press MENU/EXIT and then press / until the DISPLAY menu is highlighted. 2. Press to highlight Digital Zoom and press MODE/ENTER. The Zoom bar displays. 3. Press on the projector repeatedly to magnify the picture to a desired size. 4. To navigate the picture, press MODE/ENTER to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. 5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out functionality, and press AUTO to restore the picture to its original size. You can also press repeatedly until it is restored to the original size. The picture can only be navigated after the picture is magnified. You can further magnify the picture while searching for details. Playing 3D function 1. To enter the special preset mode, press MENU/EXIT and then press / until the DISPLAY menu is highlighted, and press / to enable or disable 3D Sync. When the 3D Sync is enabled, the current picture mode adjustment will be disabled. 2. To invert the image, press MENU/EXIT and then press / until the DISPLAY menu is highlighted, and press / to enable or disable 3D Sync Invert. 3. 3D Requirement: • PC: PC with graphic card with stereo capability ( Quad buffer feature) and can run at 120Hz/60Hz refresh rate. • Video: standard NTSC/PAL DVD player to output 60Hz/50Hz movie. • 55% of the brightness will loss. To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD devices under the 3D Disc Menu. 34 Operation