BenQ W710ST W700 & W710ST user manual - Page 51
Language, Projector, Position, Settings, Operation, Remote, Receiver, Background, Color, Splash
View all BenQ W710ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
English 4. SYSTEM SETUP: Basic menu FUNCTION Language Projector Position Menu Settings Operation Settings Remote Receiver Background Color Splash Screen MyScreen DESCRIPTION Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 27 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 15 for details. Menu display time Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu position Sets the On-Screen Display (OSD) menu position. Reminder Message Selecting On allows the projector to remind you to clean the filter. Direct Power On Powers projector on automatically when the power cable is connected. Auto Power Off Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off " on page 55 for details. Quick Cooling Enables or disables the Quick Cooling function. Selecting On enables the function and the projector cooling time will be shortened from a normal 90 second duration to approximately 2 seconds. If you attempt to restart the projector right after the quick cooling process, it may not be turned on successfully and will rerun its cooling fans. Blank Timer Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 41 for details. Sleep Timer Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours. Sets the preferred remote receiver (Front and Top) allowing the projector to accept signals from the remote control. Selects background appearance when there is no signal. Allows you to select which logo screen will display during projector start-up. Four options are available: BenQ logo, Black screen, Blue screen, or MyScreen. Captures and stores the projected picture as MyScreen. See "My Screen" on page 41 for details. Operation 51