Beretta BU9 Nano Beretta BU Nano User Manual - Page 18

The Pistol Is Still Loaded, Cocked And Ready - trigger pull

Get Beretta BU9 Nano PDF manuals and user guides View all Beretta BU9 Nano manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Gently squeeze the trigger, being careful not to upset the alignment of the front and rear sights. THE PISTOL WILL FIRE. The discharge will force the slide and barrel to the rear, which will in turn eject the fired cartridge case, reset the stiker and compress the recoil spring. Then the slide will close, feeding the next cartridge from the magazine into the chamber. WARNING: THE PISTOL IS STILL LOADED, COCKED AND READY TO FIRE. Keep your finger away from the trigger whenever you do not intend to fire. When the last round has been fired the slide will remain open. To fire again, remove the empty magazine and insert a loaded one. Pull the slide to the rear and release it to close the slide and load the chamber. When you have completed shooting, remove the magazine, check that the firing chamber is empty, see "UNLOADING" (pages 15-17) and close the slide by pulling the slide to the rear to release the slide lock. WARNING: Always unload the firearm immediately after shooting is completed. Never store a loaded firearm. To store the pistol see the paragraph "STORAGE" (page 51). WARNING: If while firing the trigger is pulled and the firearm does not immediately fire: CEASE FIRING IMMEDIATELY and do the following: Keep the firearm pointed in a SAFE direction in the event a "hang-fire" has occurred. A hang-fire occurs when there is a delay in a cartridge's ignition. With the pistol pointed in a SAFE direction, wait one (1) full minute. After one (1) full minute has elapsed, completely unload the firearm by following the "UNLOADING" instructions in this manual (pages 15-17). 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
18
Gently squeeze the trigger, being careful not to upset the alignment of
the front and rear sights. THE PISTOL WILL FIRE. The discharge will
force the slide and barrel to the rear, which will in turn eject the fired
cartridge case, reset the stiker and compress the recoil spring. Then
the slide will close, feeding the next cartridge from the magazine into
the chamber.
WARNING
:
THE PISTOL IS STILL LOADED, COCKED AND READY
TO FIRE. Keep your finger away from the trigger whenever you do not
intend to fire.
When the last round has been fired the slide will remain open.
To fire again, remove the empty magazine and insert a loaded one.
Pull the slide to the rear and release it to close the slide and load the
chamber.
When you have completed shooting, remove the magazine, check that
the firing chamber is empty, see “UNLOADING” (pages 15-17) and
close the slide by pulling the slide to the rear to release the slide lock.
WARNING
:
Always unload the firearm immediately after shooting is
completed. Never store a loaded firearm. To store the pistol see the
paragraph “STORAGE” (page 51).
WARNING
:
If while firing the trigger is pulled and the firearm does not
immediately fire: CEASE FIRING IMMEDIATELY and do the following:
Keep the firearm pointed in a SAFE direction in the event a “hang-fire”
has occurred. A hang-fire occurs when there is a delay in a cartridge’s
ignition.
With the pistol pointed in a SAFE direction, wait one (1) full minute.
After one (1) full minute has elapsed, completely unload the firearm
by following the “UNLOADING” instructions in this manual (pages
15-17).