Beretta BU9 Nano Beretta BU Nano User Manual - Page 48

the Rear Assembly pin.

Get Beretta BU9 Nano PDF manuals and user guides View all Beretta BU9 Nano manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Press the Disassembly Pin though the Frame and Chassis from right to left. It may be necessary to rotate the pin back and forth to seat the o-ring and Disassembly Pin and orient the Disassembly Pin with the flat side up. Using the punch, lift the hooked end of the cocking lever spring higher than the Rear Assembly Pin hole, and install the Rear Assembly pin from left to right. The small end enters the hole first. Using the punch seat the hooked end of the Cocking Lever Spring into the groove on the Rear Assembly pin. This completes the grip frame reassembly. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
48
Press the Disassembly Pin though the Frame and Chassis from right
to left. It may be necessary to rotate the pin back and forth to seat
the o-ring and Disassembly Pin and orient the Disassembly Pin with
the flat side up.
Using the punch, lift the hooked end of the cocking lever spring higher
than the Rear Assembly Pin hole, and install the Rear Assembly pin
from left to right. The small end enters the hole first. Using the punch
seat the hooked end of the Cocking Lever Spring into the groove on
the Rear Assembly pin.
This completes the grip frame reassembly.