Bernina 1001 Manual - Page 38

Maintenance: Cleaning and oiling • yeI- V*" • • MB NOW 2 *toktilitti If the machine is stored in a cold room, it should be brought to a warm room approximately one hour before use, to restore the oil in the bearings to a fluid state. WARNING: Please refer to the safety instructions. Th Cleaning and lubricating the hook 4 • Disconnect machine from the mains by remov- ing the mains plug from the socket. • Check that the needle is raised. • Remove presser foot 4. are-L and needle. • Open the hinged front cover on the free arm. • Lower the feed-dog by turning knob to symbol 1 • Using both thumbs, press the stitch plate up and back. • Take out the bobbin case. • Clean the feed-dog, underside of the stitch plate and hook. mr4 2 • Lightly lubricate the hook,1- 2 drops. • Replace the bobbin case. 3 • To refit the stitch plate, insert the stitch plate from the rear, push forward until it engages. • Close the hinged cover on the free arm. • Raise the feed-dog by turning knob to symbol A/V\ 32