Bernina 1300MDC User Guide - Page 121
Starting to Embroider
View all Bernina 1300MDC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Starting to Embroider Selecting the Embroidery Hoop Edit 1 Screen • select an embroidery motif from the various choices of motifs • the screen «Edit 1» appears Starting to Embroider 121 • the selected embroidery motif is shown in the most appropriate (smallest possible) hoop • the «Hoop» on-screen button shows which hoop should be attached • attach the recommended hoop Attaching the Embroidery Hoop Raising Needle and Embroidery Presser Foot • raise needle and embroidery presser foot • hold the hoop with the right side of the fabric up and the attaching mechanism to the left Attaching the Hoop • pass the hoop under the embroidery presser foot • squeeze the ends of the attaching mechanism on the side of the hoop • position the center points of the hoop (small attachment clamps) over the bracket of the embroidery arm • push the hoop down until it engages • release the attaching mechanism of the hoop Removing the Hoop • press both ends on the hoop attaching mechanism towards each other • pull up to remove the hoop Embroidering Motifs • touch «OK» or press the Start-Stop-button on head frame • embroidery computer moves to check if hoop is attached Embroidery Menu • the Embroidery menu opens with the embroidery motif • the embroidery motif is ready to be embroidered 031196.50.04_0507_a630_EN