Bernina 1300MDC User Guide - Page 149
Message, Notes
View all Bernina 1300MDC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Messages on the Screen In special cases messages may appear on the screen. They serve as a reminder, warning, or confirmation of selected applications and functions. Messages 149 Message Warning Notes The user must do something, before the function can be carried out, or the user's attention will be drawn to a specific fact. Query Lower feed dog Thread breakage or empty spool. Does the user really want to carry out the function? For example delete data, etc. Press the button «Drop feed dog». The message disappears automatically if the feed dog position was changed. Check upper thread and perhaps lower thread. The winder is on. The winder speed can be changed with the stitch width knob or the «+» und «-» onscreen buttons. If the winder is turned off or «ESC» is pressed, the message disappears automatically. Lower presser foot. The message disappears automatically if the presser foot was lowered. Raise presser foot. The embroidery computer must be cleaned / lubricated. The message disappears automatically if the presser foot was raised. Corresponding instructions are on page 103 of the manual. This notification will appear after approx. 180,000 stitches. After cleaning/oiling clear the display by touching «OK». The display can be cleared temporarily by touching «ESC», but will appear again when restarting the sewing computer. After clearing with «ESC» for the third time, the cleaning notification will only appear again after a further approx. 180,000 stitches. 031196.50.04_0507_a630_EN